China P Class Factory-Direct Compatible Linear Guide Rail linear rail brake

Product Description

ZCF BRIEF INTRODUCTION:                                                                                       
ZCF PRECISION TECHNOLOGY(HangZhou) CO.,LTD. IS A PROFESSIONAL MANUFACTURER OFLINEARXIHU (WEST LAKE) DIS.,LINEAR MODULE AND BALL SCREW ETC.SHE IS LOCATED IN HangZhou CITY,ZheJiang ,CHINA.THE NEW FACTORY COVERS 33333 SQUARE METERS AND HOLDS A BUILDING AREA OF 16000 SQUARE METERS AT PRESENT. WITH OVER 10 YEARS’ EFFORT OF OUR WHOLE TEAM. AND ALSO TRUST AND SUPPORT FROM OUR RESPECTED CUSTOMERS. WE ARE SO LUCKY TO BECOME ONE STRONG BRAND IN CHINA, WHO MAKE INTERNATIONAL STHangZhouRD PRODUCTS.WE AIM SERVE CUSTOMERS WORLDWIDELY.

PRODUCTS PHOTOS:

CH SERIES BODY STRUCTURE:
 

1.ROLLING CYCLE SYSTEM: SLIDER, XIHU (WEST LAKE) DIS. RAIL, END COVER, STEEL BALL, BALL HOLDER;

2.LUBRICATION SYSTEM: OIL NOZZLE AND TUBING JOINT

3.DUST-PROOF SYSTEM: OIL SCRAPER, NEGATIVE DUST SEAL DUST-PROOF SHEET, XIHU (WEST LAKE) DIS. RAIL BOLT COVER, METAL SCRAPER

 

ACCURACY LEVEL
 

1. THE ACCURACY OF CH SERIES LINEAR XIHU (WEST LAKE) DIS.S CAN BE DIVIDED INTO FIVE LEVELS: COMMON, HIGH, PRECISION, SUPER-PRECISION AND ULTRA-PRECISION. CUSTOMERS CAN CHOOSE THE ACCURACY LEVEL ACCORDING TO THE ACCURACY REQUIREMENT OF EQUIPMENT.
 

2.  ACCURACY OF NON-INTERCHANGEABLE LINEAR XIHU (WEST LAKE) DIS.:

MODEL CH – 25,30,35        unit : mm
ACCURACY LEVEL COMMON HIGH PRECISION HIGH-PRECISION ULTRA-PRECISION
(C) (H) (P) (SP) (UP)
TOLERANCE OF H ± 0.1 ± 0.04 0- 0.04 0- 0.02 0- 0.01
TOLERANCE OF N ± 0.1 ± 0.04 0- 0.04 0- 0.02 0- 0.01
TOLERANCE OF MUTUAL H 0.02 0.015 0.007 0.005 0.003
TOLERANCE OF MUTUAL N 0.03 0.015 0.007 0.005 0.003
MOTION PARALLELISM OF C ON A MOTION ACURACY
MOTION PARALLELISM OF D ON B MOTION ACURACY

 

3. MOTION ACCURACY CHART

RAIL LENGTH (mm) ACCURACY LEVEL (µm)
C H P SP UP
~ 100 12 7 3 2 2
100 ~ 200 14 9 4 2 2
200 ~ 300 15 10 5 3 2
300 ~ 500 17 12 6 3 2
500 ~ 700 20 13 7 4 2
700 ~ 900 22 15 8 5 3
900 ~ 1,100 24 16 9 6 3
1,100 ~ 1,500 26 18 11 7 4
1,500 ~ 1,900 28 20 13 8 4
1,900 ~ 2,500 31 22 15 10 5
2,500 ~ 3,100 33 25 18 11 6
3,100 ~ 3,600 36 27 20 14 7
3,600 ~ 4,000 37 28 21 15 7

SELECTION CRITERIA

1. PRODUCT APPLICATIONS:

1). CH SERIES: GRINDING MACHINE, MILLING MACHINE, LATHE, DRILLING MACHINE, INTEGRATED PROCESSING MACHINE, EDM MACHINE, BORING MACHINE, WIRE CUTTING MACHINE, PRECISION

2). CE SERIES: INDUSTRIAL AUTOMATION MACHINERY, SEMICONDUCTOR MACHINERY, LASER ENGRAVING MACHINE, PACKAGING MACHINE;

3). CGN/CGW SERIES: PRINTER, MACHINE ARM, ELECTRONIC INSTRUMENT AND SEMICONDUCTOR EQUIPMENT.

 

2. SELECTION OF ACCURACY LEVEL:

C, H, P, SP, UP LEVELS DEPEND ON EQUIPMENT ACCURACY REQUIREMENTS.
 

3. SELECTION OF SIZE:

1). ACCORDING TO EXPERIENCE;

2). LOAD STATUS;

3). IF LINEAR XIHU (WEST LAKE) DIS.WAY IS USED IN CONJUNCTION WITH BALL SCREW, SELECT SIMILAR SIZE AS EXTERNAL DIAMETER OF THE SCREW. IF THE EXTERNAL DIAMETER OF THE SCREW IS 35 MM, SELECT CH35.

 

4. CALCULATING THE MAXIMUM LOAD OF SLIDER:

1). CALCULATING THE MAXIMUM EQUIVALENT LOAD OF A SINGLE SLIDER WITH REFERENCE TO THE LOAD CALCULATION TABLE

2). CONFIRMATION THAT THE STATIC SAFETY FACTOR OF THE SELECTED STRAIGHT-LINE XIHU (WEST LAKE) DIS. SHOULD EXCEED THE VALUE LISTED IN THE TABLE OF STATIC SAFETY FACTOR

LUBRICATION:

IF THE LINEAR XIHU (WEST LAKE) DIS. IS NOT PROPERLY LUBRICATED, THE FRICTION OF ROLLING PARTS WILL INCREASE, AND LONG-TERM USE WILL BECOME THE MAIN REASON FOR SHORTENING THE LIFE. LUBRICANTS PROVIDE THE FOLLOWING FUNCTIONS:

(1). REDUCE FRICTION OF ROLLING PARTS, PREVENT BURNS AND REDUCE WEAR;

(2). FORMING OIL FILM BETWEEN ROLLING SURFACE AND ROLLING SURFACE CAN PROLONG ROLLING FATIGUE LIFE;

(3). PREVENTING RUST.

 

1. GREASE LUBRICATION:

EACH GROUP OF LINEAR XIHU (WEST LAKE) DIS.WAYS CAN BE SEALED WITH LITHIUM SOAP-BASED GREASE TO LUBRICATE THE BEAD GROOVE TRACK BEFORE LEAVING THE FACTORY. ALTHOUGH THE GREASE IS NOT EASY TO LOSE, IN ORDER TO AVOID INSUFFICIENT LUBRICATION CAUSED BY LUBRICATION LOSS, IT IS SUGGESTED THAT CUSTOMERS SHOULD SUPPLEMENT THE GREASE ONCE MORE WHEN THE DISTANCE REACHES 100 KM. AT THIS TIME, GREASE CAN BE INJECTED INTO THE SLIDER BY MEANS OF THE OIL NOZZLE ATTACHED TO THE SLIDER. LUBRICATING GREASE IS SUITABLE FOR SITUATIONS WHERE THE SPEED IS NOT MORE THAN 60 M/MIN AND THE COOLING EFFECT IS NOT REQUIRED.
T : OIL INJECTION FREQUENCY (hour);  Ve : SPEED (m/min)
 

2. OIL (OIL) LUBRICATION:

IT IS RECOMMENDED THAT CUSTOMERS USE LUBRICATING OIL WITH A CONSISTENCY OF ABOUT 32-150 CZPT TO LUBRICATE LINEAR XIHU (WEST LAKE) DIS.S. CZPT CAN INSTALL THE TUBING JOINT AT THE ORIGINAL POSITION OF THE OIL DISCHARGE NOZZLE ACCORDING TO THE CUSTOMER’S NEEDS, SO THE CUSTOMER ONLY NEEDS TO CONNECT THE PRESET TUBING OF THE MACHINE TO THE TUBING JOINT. THE LOSS OF LUBRICATING OIL IS FASTER THAN THAT OF LUBRICATING GREASE. WHEN USING, ATTENTION MUST BE PAID TO THE ADEQUACY OF OIL SUPPLY. IF INSUFFICIENT LUBRICATION EASILY CAUSES ABNORMAL WEAR OF LINEAR XIHU (WEST LAKE) DIS.S AND REDUCES THEIR SERVICE LIFE, IT IS SUGGESTED THAT THE FREQUENCY OF LUBRICATING OIL SHOULD BE ABOUT 0.3CM3/HR. CUSTOMERS CAN USE IT ACCORDING TO THEIR USE CONDITIONS. LUBRICATING OIL IS SUITABLE FOR VARIOUS LOADS AND SPEEDS, BUT IT IS NOT SUITABLE FOR HIGH TEMPERATURE LUBRICATION BECAUSE OF ITS VOLATILITY.

DUST-PROOF DEVICE(OPTIONS)
 

1. DUST-PROOF DEVICE CODE:

IF YOU NEED THE FOLLOWING DUST-PROOF EQUIPMENT, PLEASE ADD THE CODE AFTER THE PRODUCT MODEL.

INSTALLATION OF LINEAR XIHU (WEST LAKE) DIS.WAY

THE INSTALLATION METHOD OF LINEAR XIHU (WEST LAKE) DIS. MUST BE SET ACCORDING TO THE OPERATING CONDITION OF THE MACHINE, SUCH AS THE DEGREE OF VIBRATION AND IMPACT FORCE, THE REQUIRED WALKING ACCURACY AND THE LIMITATION OF THE MACHINE.WHEN PAIRING NON-INTERCHANGEABLE LINEAR XIHU (WEST LAKE) DIS.S, ATTENTION SHOULD BE PAID TO THE DIFFERENCE BETWEEN THE REFERENCE RAIL AND THE DRIVEN RAIL. THE ACCURACY OF THE DATUM LEVEL ON THE SIDE OF THE DATUM RAIL IS HIGHER THAN THAT OF THE DRIVEN RAIL, SO IT CAN BE USED AS THE SUPPORTING SURFACE FOR THE BED INSTALLATION. THE REFERENCE RAIL IS MARKED WITH MA, AS SHOWN IN THE FIGURE.

 

1. FIXING METHODS

WHEN THE BED IS SUBJECTED TO VIBRATION AND IMPACT FORCE, THE XIHU (WEST LAKE) DIS. RAIL AND SLIDER MAY DEVIATE FROM THE ORIGINAL FIXED POSITION AND AFFECT THE ACCURACY. IN ORDER TO AVOID SIMILAR SITUATION, IT IS SUGGESTED TO USE THE FOUR FIXED WAYS LISTED BELOW TO FIX THE XIHU (WEST LAKE) DIS. RAIL AND SLIDER TO ENSURE THE ACCURACY OF THE MACHINE.

 

2. INSTALLATION OF LINEAR RAIL:

 

US $25-42
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Machines
Material: Steel
Structure: Machine Table
Installation: All
Driven Type: N/a
Carrying Capacity: Weight Level

###

Samples:
US$ 45/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

MODEL CH – 25,30,35        unit : mm
ACCURACY LEVEL COMMON HIGH PRECISION HIGH-PRECISION ULTRA-PRECISION
(C) (H) (P) (SP) (UP)
TOLERANCE OF H ± 0.1 ± 0.04 0- 0.04 0- 0.02 0- 0.01
TOLERANCE OF N ± 0.1 ± 0.04 0- 0.04 0- 0.02 0- 0.01
TOLERANCE OF MUTUAL H 0.02 0.015 0.007 0.005 0.003
TOLERANCE OF MUTUAL N 0.03 0.015 0.007 0.005 0.003
MOTION PARALLELISM OF C ON A MOTION ACURACY
MOTION PARALLELISM OF D ON B MOTION ACURACY

###

RAIL LENGTH (mm) ACCURACY LEVEL (µm)
C H P SP UP
~ 100 12 7 3 2 2
100 ~ 200 14 9 4 2 2
200 ~ 300 15 10 5 3 2
300 ~ 500 17 12 6 3 2
500 ~ 700 20 13 7 4 2
700 ~ 900 22 15 8 5 3
900 ~ 1,100 24 16 9 6 3
1,100 ~ 1,500 26 18 11 7 4
1,500 ~ 1,900 28 20 13 8 4
1,900 ~ 2,500 31 22 15 10 5
2,500 ~ 3,100 33 25 18 11 6
3,100 ~ 3,600 36 27 20 14 7
3,600 ~ 4,000 37 28 21 15 7
US $25-42
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Machines
Material: Steel
Structure: Machine Table
Installation: All
Driven Type: N/a
Carrying Capacity: Weight Level

###

Samples:
US$ 45/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

MODEL CH – 25,30,35        unit : mm
ACCURACY LEVEL COMMON HIGH PRECISION HIGH-PRECISION ULTRA-PRECISION
(C) (H) (P) (SP) (UP)
TOLERANCE OF H ± 0.1 ± 0.04 0- 0.04 0- 0.02 0- 0.01
TOLERANCE OF N ± 0.1 ± 0.04 0- 0.04 0- 0.02 0- 0.01
TOLERANCE OF MUTUAL H 0.02 0.015 0.007 0.005 0.003
TOLERANCE OF MUTUAL N 0.03 0.015 0.007 0.005 0.003
MOTION PARALLELISM OF C ON A MOTION ACURACY
MOTION PARALLELISM OF D ON B MOTION ACURACY

###

RAIL LENGTH (mm) ACCURACY LEVEL (µm)
C H P SP UP
~ 100 12 7 3 2 2
100 ~ 200 14 9 4 2 2
200 ~ 300 15 10 5 3 2
300 ~ 500 17 12 6 3 2
500 ~ 700 20 13 7 4 2
700 ~ 900 22 15 8 5 3
900 ~ 1,100 24 16 9 6 3
1,100 ~ 1,500 26 18 11 7 4
1,500 ~ 1,900 28 20 13 8 4
1,900 ~ 2,500 31 22 15 10 5
2,500 ~ 3,100 33 25 18 11 6
3,100 ~ 3,600 36 27 20 14 7
3,600 ~ 4,000 37 28 21 15 7

Applications and Maintenance of a Linear Rail

Whether you are looking to install a linear rail or you are looking for ways to maintain your existing one, there are some important factors to consider. In this article, you will learn about the applications for linear rails, the maintenance of a linear rail, and some of the common issues associated with linear guides.
linear rail

Common issues with linear guides

Choosing the right linear guide can yield significant advantages in performance, cost and durability. However, it isn’t enough to just pick the right guide. To ensure maximum performance, you need to understand the components and technologies that go into the design. This article will highlight some of the most common problems associated with linear guides, and how to avoid them.
The most important thing to remember about a linear guide is that it is a component of a system. It should not be operated alone. If a linear guide fails, you’ll need to take steps to get it repaired.
A good way to gauge how well a guide will perform is to look at the load moments it carries while on a wall. This will tell you how much the guide can support over a full run of travel.
One of the most important things to consider is the type of mounting you use. It should match the precision of the guide unit. The mounting surface should be flat, and there should be no gaps or wiggles between the guide unit and the mounting surface.
The right kind of mounting will not only make installation easier, but will also ensure that your guide unit operates at its best. In addition, it can help prevent contamination from getting into the guide unit.
Another thing to consider is the quality of the lubricant. Linear guides are prone to corrosion, so it’s important to lubricate them regularly. You can do this by adding a high-quality lubricant that’s resistant to corrosive substances.
Using a linear guide with a good seal can help avoid corrosion. A good seal should have sealing lip that fits tightly around the ball guide profile. In addition, you should consider a thicker lubricant, such as calcium soap, as opposed to standard greases in wet environments.
Another thing to consider is how you can best align the guide unit. For example, you can use a high-speed end cap to reduce misalignment. This will reduce binding, as well as prevent a buildup of dirt and other debris between the guide unit and the mounting surface.

Common applications for linear rails

Across industrial applications, there are many uses for linear rails. Linear rails provide an extremely effective way of moving products and items through production processes. They offer excellent load capacity, low friction and high stiffness.
Linear rails can be manufactured in short or long lengths. These systems are ideal for moving loads from a few grams to thousands of kilograms. Depending on the specific application, the load capacity of the rail may vary.
Linear rails are commonly used in machine-tool applications and semiconductor manufacturing. Linear rails are also used for moving heavy equipment through factory floors. Linear rails are also used in advanced medical applications.
Linear rails can be used on a variety of surfaces. Depending on the type of application, the orientation of the rail may vary. This depends on the type of load and the amount of force being applied. It may also be influenced by the amount of dirt and dust.
Linear rails are designed to support loads from a few grams to thousands of kilograms. They are used in a variety of industries, including semiconductor manufacturing, packaging and medical devices. In many applications, linear rails are also used as the guide for actuators. Linear rails are a useful alternative to complex alignment operations.
Linear rails are often used in overhead transport systems. Linear rails are usually made of high strength steel and are profiled for maximum rigidity. They also have nickel-plating for corrosive environments.
Linear rails are often used in factory floors for heavy equipment, like moving robot arms. These systems can be used to move items around the factory floor or on high platforms above walkways. Linear rails are also used in the food and beverage industry. They are commonly used in weighing machines and CNC machines.
Linear rails are ideal for moving products with minimal friction. They also are used in semiconductor manufacturing, where the need for precision is crucial. Linear rails provide high load capacity and can accommodate travel speeds of up to five meters per second. Linear rails are also used in many transportation lines, including ice machines.
linear rail

Cost of linear rails

Choosing the right linear rail can have a significant impact on the cost and performance of your system. Linear rails are used in all kinds of industries. They are highly effective when it comes to moving goods and equipment through the manufacturing process. They can be used vertically or horizontally. They are anchored to aluminum extrusion profiles for increased stiffness and accuracy.
The cost of linear rails can be justified by the advantages they offer. They provide high levels of rigidity and load capacity, making them a good option for moving products with minimal friction. Linear rails are also less likely to bend or vibrate. They also have a higher degree of precision and accuracy.
The price of linear rails is higher than those of linear rods. This is due to the fact that linear rails require more screws per unit length. They also require more support. If the rails are not supported, they will bend or rattle. The rails must be fully supported to achieve optimal precision.
Linear rails offer the most rigidity against gravity. They can support loads ranging from a few grams to several tons. They can also withstand moment and lift-off loads.
Rails can be installed using hex slot screws. They require more screws per unit length than rods. They also require accurate mounting surfaces. They can be installed by hand or with tools.
Linear rails are less likely to bend than rods, making them a better option for low precision applications. They are also cheaper.
However, they are not suitable for consumer applications. Rails are not as durable as rods and they are susceptible to bending and vibration. They are also subject to shipping oil and corrosion during transport and storage.
Linear rails cost around 2.5 to 4 times as much as linear rods. This is because they are more expensive to manufacture. They also require a more complex assembly process. They require hex slot screws along the length of the rail. It can be difficult to install.
The lifespan of linear rails is a frequently asked question among design engineers. It’s important to consider the factors that will reduce the lifespan.
linear rail

Maintenance of linear rails

Whether you’re working with a linear rail system in an industrial environment or a consumer application, proper maintenance is critical. A well-maintained linear guide rail can withstand loads from a few grams to thousands of kilograms, providing a high degree of rigidity and load capacity.
The most important aspect of maintenance for a linear guide rail is lubrication. Proper lubrication reduces friction and wear, resulting in longer life for your guide rail. The amount of lubrication required depends on the environment in which it is being used and the frequency of use. Generally, a general purpose lubricant is adequate for low speed low load applications. However, when long lubrication cycles are required, a specialised bearing lubricant is necessary.
The components of a linear guide rail are comprised of rail, carriage, linear guide block and load supporting rollers. The rails and guide blocks are made of hardened steel or anodized aluminum. The carriage has two “wings” that align with the rail channel. The rollers are made of softer materials such as stainless steel. A lint-free paper towel can be used to clean the groove in the rail.
If a linear guide rail is used incorrectly, it can corrode. In order to maintain the integrity of the rail, it is important to clean it thoroughly. The lubrication mechanism is often accessed via a syringe, so cleaning the rail is relatively easy. Clean the rail with a shop towel, and then apply grease to the moving parts. This will smooth the motion of the ball screw guides and prolong the life of the linear slides.
If the linear guide is used incorrectly, it can cause excessive misalignment, indentations, and corrosion. It is recommended that the rail be cleaned and lubricated as needed.
The type of linear rail you choose will depend on the type of load it can handle. Aside from the load capacity, it is also important to consider the cost of maintenance. Typically, a linear rail system is more expensive than other systems, so you’ll want to make sure you get the right rail for the job.
China P Class Factory-Direct Compatible Linear Guide Rail     linear rail brakeChina P Class Factory-Direct Compatible Linear Guide Rail     linear rail brake
editor by czh 2022-11-26