China China Factory Wholesale Linear Motion Guide Block & Rail & Linear Actuator Kit double linear rail

Product Description

PRODUCT DESCRIPTION

Advantages and Features of Linear Xihu (West Lake) Dis.ways
Δ High positional accuracy
Δ Long life with high motion accuracy
Δ High speed motion is possible with a low driving force
Δ Equal loading capacity in all directions
Δ Easy installation
Δ Easy lubrication

Δ Interchangeability

 

         THK: SHS, SSR, SHW, SRS, SCR, EPF, HSR, SR, HRW, HR, GSR/GSR-R, GSR Series
        HIWIN: HG, WE, RG, MGN, QH, QE, PG, CG Series
        CPC: MR, ST Series
        CSK: LMG, END-M, CS Series
        PMI: HG, EG, MGN/MGW Series
        TBR: TM, TR Series
        TBI, REXROTH, IKO, etc

 


HIWIN
HGH15CA  HGW15CA    HGL15CA   EGH15SA  EGW15SA    CGH15CA    CGW15CA   MGN5C    MGW5C
HGH20CA  HGW20CA    HGL25CA   EGH15CA  EGW15CA   CGH15HA     CGW15HA    MGN7C    MGW7C
HGH20HA  HGW20HA     HGL25HA    EGH20SA  EGW20SA   CGH20CA    CGW20CA   MGN7H    MGW7H
HGH25CA  HGW25CA    HGL30CA    EGH20CA  EGW20CA   CGH20HA    CGW20HA   MGN9C    MGW9C
HGH25HA  HGW25HA    HGL30HA    EGH25SA   EGW25SA   CGH25CA    CGW25CA  MGN9H    MGW9H
HGH30CA  HGW30CA   HGL35CA    EGH25CA EGW25CA   CGH25HA    CGW25HA   MGN12C  MGW12C
HGH30HA  HGW30HA   HGL35HA    EGH30SA   EGW30SA    CGH30CA   CGW30CA  MGN12H  MGW12H
HGH35CA HGW35CA    HGL45CA   EGH30CA   EGW30CA   CGH30HA    CGW30HA   MGN15C  MGW15C
HGH35HA  HGW35HA    HGL45HA    EGH35SA   EGW35SA   CGH35CA    CGW35CA   MGN15H  MGW15H
HGH45CA  HGW45CA   HGL55CA   EGH35CA   EGW35CA   CGH35HA    CGW35HA   HGH45HA  HGW45HA   HGL55HA CGH45CA    CGW45CA    HGH55CA  HGW55CA  CGH45HA    CGW45HA    HGH55HA  HGW55HA
HGH65CA  HGW65CA    HGH65HA  HGW65HA
THK
SNR25R       SNR25C        SHW17CA   HSR20CA   GSR15T           SRS9WM       RSR15
SNR25LR    SNR25LC     SHW27CA   HSR20A      GSR15TUU        SRS12           RSR15ZM
SNR35R       SNR35C       SHW21CR   HSR25A      SRS9XM           RSR15WV     SRS5M
SNR35LR     SNR35LC    SHW12CR   HSR15CA    SRS15XM        RSR15ZM      SRS7M
SNR45R       SNR45C      HSR25CA   SRS12M      RSR12VM        SNR45LR       SNR45LC   
SNR55LR     SNR55LC   HSR55R      SRS9KM      HSR45A          SRS15M        HSR65HA                                    SSR20XV    SHS15C        HR1530UU     SRG55LC     HRW21CR     NR45R             SVR45C  
SR15W      SSR25XV      SHS25C    HR4085TUU   SRG45LR         HRW21CA    NR45LR
SHS35C     HR3575TUU  SRG20LV      HRW17CA     NR65R          SNS35R
PMI
MSA15A           MSA15E         MSA15S       MSB15T         MSB15TS        MSR25E       MSR25S
MSA20A           MSA20E        MSA20S         MSB15E            MSB15S           MSR25LE     MSR25LS
MSA20LA        MSA20LE      MSA20LS      MSB20TE         MSB20TS        MSR30E      MSR30S
MSA25A           MSA25E       MSA25S          MSB20E            MSB20S           MSR30LE     MSR30LS
MSA25LA        MSA25LE     MSA25LS       MSB25TE         MSB25TS        MSR35E        MSR35S
MSA30A        MSA30E        MSA30S          MSB25E         MSB25S           MSR35LE     MSR35LS
MSA30LA      MSA30LE     MSA30LS       MSB30TE         MSB30TS        MSR45E      MSR45S
MSA35A        MSA35E        MSA35S        MSB30E             MSB30S           MSR45LE      MSR45LS
MSA35LA      MSA35LE     MSA35LS     MSB35TE         MSB35TS      MSR55E         MSR55S
MSA45A          MSA45E        MSA45S         MSB35E            MSB35S        MSR55LE     MSR55LS
MSA45LA       MSA45LE     MSA45LS     MSB35LE         MSB35LS       MSR65LE      MSR65LS
MSC7M       MSD7M       SME15EA             SME15EB        SME15SA           SME15SB         SMR25E         SMR25S
MSC7LM      MSD7LM       SME15LEA         SME15LEB      SME15LSA        SME15LSB     SMR25LE       SMR25LS
MSC9M       MSD9M       SME20EA            SME20EB         SME20SA           SME20SB         SMR30E         SMR30S
MSC9LM     MSD9LM       SME20LEA         SME20LEB       SME20LSA        SME20LSB      SMR30LE      SMR30LS
MSC12M      MSD12M       SME25EA         SME25EB         SME25SA            SME25SB        SMR35E         SMR35S
MSC12LM   MSD12LM    SME25LEA         SME25LEB      SME25LSA         SME25LSB      SMR35LE     SMR35LS

APPLICATION
Grinding machine
Drilling machine
Machine center
Lathe
XYZ axes of heavy cutting machine tools
Grinding head feeding axies of grinding machines
Milling machine
Z axies of boring machine and machine tools
Z axies of industrial machine
Measuring equipment
Precision XY table
Welding machine
Binding machine
Auto packing machine
Automatic equipment
High speed transfer device
Semiconductor equipment
Wood cutting machine
Laser cutting machine
Laser marking machine
Blow moulding machine
Sing axies robot-robotics
Medical equipment
CNC machine centers
Wire cutting machines
Plano millers

FLOWTECH Machinary & Engineering

HangZhou FlowTech Machinary & Engineering Co., Ltd. as the agent of the brand mechanical CZPT rail. With the accumulated knowledge and professional skills over the years, will provide users with a variety of brands and models to choose, facing the future development.
Company’s main
Japan THK, ZheJiang CPC, CSK, PMI, HIWIN, TBI, ASK, and domestic brands of linear guide, rolling guide, miniature CZPT rail and other rail products, suitable for grinding machine, lathe, drilling machine, integrated machine, wire cutting machine, precision measuring instrument industry automation machines, packaging machines, electronic equipment, semiconductor machinery, semiconductor equipment, and other fields.
Adhering to the “integrity-based” business philosophy, we will give full play to the knowledge and expertise we have, to provide the best quality service for the majority of users.

PAYMENT & DELIVERY


 

FAQ

1.Q: Are you a factory or trade company?
   A: We are factory + trading, brand linear CZPT distributorcan offer high quality product.
2.Q: When can I get the quotation?
   A: We are usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price. Please call me or tell me in your email so that we will regard you are inquiry priority.
3.Q: Do you provide samples? Is it free or extra?
   A: Yes. If the sample is simple and of little value, then free samples are provided, but the buyer must bear the international delivery fee. If the sample needs to be ordered, the buyer must bear the sample fee and the international express fee. Please inform us the model you interested, we can offer the price list for your reference.
4.Q: What is your MOQ?
   A: 1) In stock: MOQ is 1pcs.
         2) Not in stock, it depends on the actual situation.
5.Q: What is your terms of payment?
   A: 1)Payment=5000USD, 30% T/T in advance, balance before shipment.                                                                            2)We accept T/T, PayPal, VISA, Western Union payment.

Why Choose Us? (Our Competitive Advantage)
· Factory outlet, high quality, cheap and cheerful!
· Special logistics line, low shipping cost.
· DDP price for some countries, includes all cost, delivery door to door!

Always with full enthusiasm. sincere cooperation attitude and CZPT business philosophy, we warmly welcome your inquiry!
 

US $2.5-28
/ Piece
|
1 Piece

(Min. Order)

###

Feature: Magnetically, Corrosion Resistant, High Speed, Low Noise; High Accuracy; Heavy Load Capacity
Function: Super
Flange Shape: Square
Shape: Flange
Series: LM
Material: Stainless Steel

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

1.Q: Are you a factory or trade company?
   A: We are factory + trading, brand linear guide distributor
can offer high quality product.
2.Q: When can I get the quotation?
   A: We are usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price. Please call me or tell me in your email so that we will regard you are inquiry priority.
3.Q: Do you provide samples? Is it free or extra?
   A: Yes.
If the sample is simple and of little value, then free samples are provided, but the buyer must bear the international delivery fee. If the sample needs to be ordered, the buyer must bear the sample fee and the international express fee. Please inform us the model you interested, we can offer the price list for your reference.
4.Q: What is your MOQ?
   A: 1) In stock: MOQ is 1pcs.
         2) Not in stock, it depends on the actual situation.
5.Q: What is your terms of payment?
   A: 1)Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance, balance before shipment.                                                                            2)We accept T/T, PayPal, VISA, Western Union payment.
US $2.5-28
/ Piece
|
1 Piece

(Min. Order)

###

Feature: Magnetically, Corrosion Resistant, High Speed, Low Noise; High Accuracy; Heavy Load Capacity
Function: Super
Flange Shape: Square
Shape: Flange
Series: LM
Material: Stainless Steel

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

1.Q: Are you a factory or trade company?
   A: We are factory + trading, brand linear guide distributor
can offer high quality product.
2.Q: When can I get the quotation?
   A: We are usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price. Please call me or tell me in your email so that we will regard you are inquiry priority.
3.Q: Do you provide samples? Is it free or extra?
   A: Yes.
If the sample is simple and of little value, then free samples are provided, but the buyer must bear the international delivery fee. If the sample needs to be ordered, the buyer must bear the sample fee and the international express fee. Please inform us the model you interested, we can offer the price list for your reference.
4.Q: What is your MOQ?
   A: 1) In stock: MOQ is 1pcs.
         2) Not in stock, it depends on the actual situation.
5.Q: What is your terms of payment?
   A: 1)Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance, balance before shipment.                                                                            2)We accept T/T, PayPal, VISA, Western Union payment.

Using a “Traditional” Linear Rail in a 3D Printer Build

Using a “traditional” linear rail in a 3D printer build is a great way to add a bit of extra strength to your printer’s frame, but it comes with a few drawbacks. The following article will explain some of the reasons you might want to consider a sliding carriage and rail instead.

linear rail

Applications

Basically, a Linear Rail System is a piece of mechanical equipment designed to sustain the motion of equipment. The system uses a combination of linear guides and bearings to maintain a steady motion.
The linear rail system is used in many industries, from manufacturing to transportation. It is important to design the system to suit the intended application. Some of the most common applications include material transfer, medical sample handling and factory automation.
The most common type of linear rail is the recirculating ball guide. Recirculating ball guides offer many advantages, including moment control, high load capacity and precision. However, there are limitations in some applications.
In the food and beverage industry, special linear bearings are necessary to handle harsh conditions and to meet health and safety standards. Some applications include weighing machines, pick and place modules, and packaging systems.
Linear rails also require precision mounting surfaces to ensure accurate motion. They are available in various lengths and are suitable for most applications.
A linear rail system can be used horizontally or vertically. They provide a smooth motion, reducing friction and minimizing wear. Linear Rail Systems can support loads ranging from a few grams to thousands of kilograms. The rail itself is made from high-strength steel and can be galvanised for added durability.
Linear Rail Systems can be used in a wide variety of industries, from pharmaceutical manufacturing to semiconductor manufacturing. The systems are easy to install and have a heavy load bearing capacity. They provide high stiffness and load capacity, and are perfect for moving loads with minimal friction. These systems also have low frictional resistance, which is important in pneumatic-driven systems.
There are several other advantages to using linear rails, including low cost, high load capacity, low friction and low maintenance. The rails are made from stainless steel or carbon steel.

CZPT linear guide rails

CZPT has a full lineup of linear guide rails, slides, and carriages to suit almost any application. Whether you’re assembling a high tech medical instrumentation system or automating your garage, CZPT has the equipment to get the job done. The company offers a wide selection of linear motion equipment ranging from mountable linear bearings to miniature guide rail and carriage assemblies.
The company also offers a full range of linear guide rails and carriages from high strength steel to high tech aluminum. The company’s extensive selection of linear motion products can be accessed through its convenient online ordering system. It also has a number of useful guides to help you choose the best equipment for your needs.
CZPT’s line of linear guide rails and carriages also includes space saving miniature guide rail and carriage assemblies. With a product lineup boasting over 500 linear motion devices, the company has something for just about every budget and need. CZPT’s line of linear guide systems is engineered to ensure maximum efficiency and reliability in an array of applications. CZPT’s linear guide products are the best in the industry. A CZPT linear guide can stand up to tearing loads and torque forces. Its superior performance can be maintained in a clean environment with proper maintenance. A well maintained rail can last for many years.
CZPT has a number of eminently sexy linear guide and carriage solutions to suit any application. You can browse by manufacturer or category to find what you’re looking for. From drilled and undrilled linear rails to carriages to linear guide slides, CZPT can help you make your next project a success. The company offers the best prices in the business and its products are made in the United States and Canada.
linear rail

Sliding carriage and rail

Whether you’re looking for a new or used linear carriage and rail, there are a few things to keep in mind. For instance, you’ll need to choose a sturdy base material, like granite or steel, that can withstand the weight of the load. In addition, you’ll need to secure the linear components to the base.
Also, you’ll need a control system to regulate the carriage’s motion. These systems can be controlled by operator controls or feedback signals from sensors. If your application calls for a heavy load, you might want to consider a profiled rail.
Another option is a sleeve bearing slide. These slides are designed to be simple to operate, but they are not as durable as other slides.
A sleeve bearing slide is typically used in light-weight applications. It can be made of a variety of materials, including aluminum, steel, or stainless steel. These slides can have a ball screw drive and a linear motor.
These slides can also have rolling element bearings. These balls are used to support the load in the carriage. This decreases friction and provides a smoother motion.
In addition, these slides can be lubricated. You can find these slides in a variety of designs, including recirculating and non-recirculating. In non-recirculating designs, the rolling elements travel at half the speed of the carriage. In recirculating designs, the rolling elements follow the carriage’s looped course.
Some linear guides offer a variety of materials, including stainless steel, aluminum, and granite. These materials can be customized to match your needs. Some may also have custom-engineered features, such as a rail and bearing system, stage, and drive units. If you’re looking for a cost-effective solution, you may want to consider a custom-engineered linear slide.

Robot transport units

Adding linear movement to a Robot system is an effective way to enhance a Robot’s performance. The robot can now move larger and heavier workpieces to and from different machines, and to increase its utility. Adding linear movement also increases the number of activities that can be performed. This increases the robot’s throughput and helps to maximize the return on investment.
The Robot Transfer Unit (RTU) is an effective solution for adding linear movement to Robot systems. It increases the efficiency of 6-axis robots by allowing them to move workpieces along a moving conveyor line. RTUs are used in material handling applications such as welding, painting, inspection, and palletizing.
Robot Transfer Units can be floor-mounted, or raised above operations or the floor. This increases worker freedom of movement, while allowing for improved access to machinery by maintenance personnel. They also save floor space and can allow materials to be moved closer to the work area.
RTUs are used to carry robots between work stations and in material-handling applications. They are generally floor-mounted or can be elevated to save floor space and provide a view of the operation.
A typical RTU will include two workpiece transport units. Each workpiece transport unit includes a robotic arm, a guide rail, and a slidably mounted arm. Each workpiece transport unit also includes an electromagnet that propels the unit along the guide rail. The arm can rotate or “flip” about a horizontal axis (R) and the end effector can hold wafers (W) or rotate about a vertical axis (Z 2).
Each transport unit has a lateral outside dimension 640. This allows the unit to be slidably mounted on both sides of the guide rail structure.
linear rail

Drawbacks of using “traditional” linear rail in a 3D printer build

Using a traditional linear rail in a 3D printer build isn’t for the faint of heart. If you’re building a printer for your own personal use, it’s likely you’ll have to do a bit of tinkering to get the machine working as it should. Luckily, there are many alternatives to the conventional build process. For example, you can build a machine with an aluminum extrusion instead of using the traditional molten plastic. This allows you to print a wider range of materials and improves the machine’s longevity. Alternatively, you could use an aluminum extrusion with a delrin wheel for improved print quality.
You could also build a 3D printer from scratch with a custom frame made from aluminum. The material is a good choice if you’re looking to print large format items. The material is also lightweight, which translates into improved print quality and a smoother print experience. Using an aluminum extrusion for the frame of a 3D printer could save you some serious cash, if you know what you’re doing.
It’s a good idea to do your homework before making a purchase. The best way to avoid getting ripped off is to find a reputable manufacturer and check the credentials of the company’s products. This is especially true if you’re looking to buy a machine that can be used to build 3D models of your own designs. As with anything, buying the wrong printer for the wrong application can lead to disaster. Thankfully, you can avoid some of the pitfalls with a little research and a few recommendations. If you’re looking to build the machine of your dreams, take the time to learn what you’re doing first.
China China Factory Wholesale Linear Motion Guide Block & Rail & Linear Actuator Kit     double linear railChina China Factory Wholesale Linear Motion Guide Block & Rail & Linear Actuator Kit     double linear rail
editor by czh 2022-12-08